Kyosho 1/8 EP 4WD Readyset Psycho Kruiser VE (w/KT-331P)

The Kyosho Psycho Kruiser VE is not for the faint of heart. In fact, it should come with a disclaimer. Some call it the most extreme power in an R/C model ever experienced. The combination of 22.2v 6-cell LiPo battery and 1500Kv NEON 7 brushless motor deliver frightening acceleration and top speeds of more than 80km/h! Factory assembled with loads of features and an Inferno pedigree, this ReadySet beast is for experienced drivers only.

Features:

3 differential, shaft drive, full time 4WD chassis
Fully factory assembled Readyset
Pre-cut 4 color printed body
Pre-installed 1500Kv 22.2V + Team Orion NEON 7 brushless motor (drip proof)
2.4GHz R/C system with Syncro KT-331P transmitter
Includes waterproof ultra high torque KS-203 steering servo
Hardened main chassis
Machined aluminum dial adjustable big bore shocks
Hardened steel straight cut bevel gears and reinforced differential ring gears
6-spoke black chrome wheels & block tires
Stabilizers and universal joints are equipped on front and rear
Mud guard installed on rear axle provides protection from dirt and mud
Resin chassis stiffener as used on the Inferno NEO is installed on front and rear
Full ball bearings
Large bumper provides protection for the front suspension holders and lower arm plate
Compatible with many optional parts for the Inferno series

Specifications:

Type: Electric Monster Truck
Scale: 1/8
Length: 550mm
Width: 427mm
Height: 230mm
Wheelbase: 355mm
Ground Clearance: 40mm
Weight: aprox. 4650g
Suspension: 4-wheel Independent
Drivetrain: 4WD
Tread (F/R): 289mm / 289mm
Motor: 1500Kv Team Orion Neon 7 brushless motor
Radio: Syncro KT-331P 2.4GHz
Servos: Included
Batteries: None - Requires batteries (Sold Separately)
Gear Ratio: 12.375:1
Body: Painted/Installed
Ball Bearings: Full Ball Bearings
Experience Level: Expert
Recommended Environment: Outdoor

Includes:

Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHZ R/C system Syncro KT-331P pre-installed
L-shape hex wrenches : 1.5, 2.0 ,2.5, 3.0mm
Cross wrench (large)
17mm wheel wrench

Needed to Complete:

(2) 2-3 cell LiPo Batteries with T-Style/Deans type connector run in series configuration. Minimum 4300mAh recommended.
Lipo compatible charger
(4) AA alkaline batteries for transmitter