The MINI-Z RWD series combines a Syncro KT-531P transmitter with a rear-drive chassis that emphasizes running .

The MINI-Z Racer has become a well-established R/C model that anyone can easily get started with using just 8 AAA batteries. Based on the concept of ``making it easier for a wider range of users to enjoy,'' the Syncro KT-531P transmitter and a body full of scale that realistically reproduce popular car models have been set. is the MINI-Z RWD series. The Syncro KT-531P transmitter is equipped with dual rate and LED control functions in addition to the steering trim and throttle trim, and the steering wheel is equipped with a sponge as standard to ensure a good fit during control. Also included is a factory-completed body that will satisfy the joy of decorating with a finish similar to that of a display model. Since the chassis also follows the proven MR-03, not only the driving performance but also the durability and reliability are guaranteed. In addition, by adopting a new board with a completely renewed control program in line with the adoption of the Syncro KT-531P transmitter, it achieves linear handling for steering, and when the optional gyro unit (MZW431) is installed, behavior is also more controllable. This is the perfect package for your "first R/C car", so why not start your R/C life with this series?
*Since the Syncro KT-531P transmitter uses FHSS2.4GHz, it is not compatible with conventional ASF/MHS/FHS2.4GHz systems.

• A new series that uses the newly developed Syncro KT-531P transmitter that can be used in various sets.
• Steering feel is dramatically improved by adopting a new board with a completely new control program.
• The factory-assembled body has a high-scale finish that rivals the display model.
• Full bearing specification that adopted a total of 7 ball bearings, which were previously optional.
• Can be installed on all Mini-Z Racer bodies. * Separate motor case and differential gear assembly required for mounting body.
• Adopted original front suspension "VCS" that brings out the optimum camber change according to the suspension stroke.
• Optional gyro unit (MZW431) can be installed. The effect of the gyro unit can be adjusted with the volume installed on the vehicle body (*When using the separately sold KT-432PT transmitter, it can be adjusted with the transmitter).

The NSX embodies the concept of "strength and lightness. A design that fuses the two extremes." Its wide-and-low, flowing form that makes full use of cutting-edge aerodynamics is realistically reproduced.

A Syncro KT-531P transmitter with a stylish design is included. In addition to the steering/throttle trim, it is also equipped with a dual rate that can adjust the amount of steering angle and an LED control function. In addition, it is possible to set a training mode that suppresses the vehicle speed (it is set to training mode at the time of shipment).

Since the chassis follows the proven MR-03, it is possible to install a wide variety of MR-03 chassis parts and a gyro unit (MZW431) that enhances controllability.

Both narrow and wide tread can be changed by replacing the front lower & upper plate and steering tie rod. In addition, it is also possible to change the wheelbase according to the vehicle model (* optional parts sold separately are required for change).

With a rich lineup of optional parts for MR-03, you can step up according to your budget and level.

TECHNICAL DATA

• Length:                    167.5mm
• Width:                      75mm
• Height:                     46.0mm
• Wheelbase:             98mm (LL)
• Tread:                      wide
• Chassis:                  RWD (MR-03)
• Motor mount:           MM
• Front wheel offset:   narrow +1.5mm (for RWD)
• Rear wheel offset:   Wide +1.5mm (for RWD)
• Radio:                      Syncro KT-531P

KIT CONTENTS

• Factory-assembled chassis
• Factory-assembled plastic body with painting and markings
• Syncro KT-531P 2.4GHz transmitter
• Parts for changing front tread
• Front suspension spacers for adjustment
• 6T/7T/8T/9T pinion gears
• Wheels
• Wrench
• Pinion removal tool
• Spare wheel nut
• Pairing stick
• Tire and wheel included
• Mini pylon

WHAT YOU NEED BEFORE RUNNING

• 4 AAA alkaline or Ni-MH batteries for running
• 4 AAA alkaline batteries for transmitter