Roden 1/72 ALBATROS W-4 (late) Plastic Model Kit

Item No.: ROD034

Please login or register to view pricing.

In the middle of 1916 the Military Command of Germany placed order with several companies for building special fighter with floats. The aircraft of this type was needed to protect naval bases along the Flanders Goast.
The Albatros Flugzeugwerke, which at that moment started production of Albatros D.I fighter, very quickly re-developed D.I.'s design to the naval requirements. Fuselage construction remained the same, however the wings area, as well as the gap between the wings, increased. The configuration of the tail plane unit also changed and undercarriage was revised for floats installation.
The first prototype (w/n 747) was delivered for test flights in August 1916, but soon it was returned to the factory because the floats were too short. One month later, W.4 was tested again. Pilots reported that the plane was difficult to control, but its maximum speed and climb speed were sufficient.
The first three planes (production numbers: 747, 785, 786) were equipped with early-type floats; the next 10 planes (w/n 902,911) that were produced in 1917 had floats of improved type. Such floats were installed to all planes that were built later.
The exploitation of aircrafts in the naval environment encountered certain troubles: salt water could easily spoil fabric-covered wings, wooden floats and propellers; besides that, side radiators tended to boil-off more water than it was necessary. All these shortcomings were to be eliminated in the process of mass-production.
Starting with the plane no.1484, which conducted its first flight in July 1917, all W.4s were equipped with four ailerons and wing-mounted radiator; struts between fuselage and floats were slightly shortened. Maneuverability of the late version was better, but inspite of all these advantages, W.4 did not continue its military service. At the end of 1917, the successful exploitation of two-seaters like Friedrichshafen FF33 and Hansa Brandenburg W.12 proved that two-seater fighters were the most suitable for naval service.
In total, 118 Albatros W.4 were built; Austria-Hungary purchased eight of them, and the last lot of 20 aircrafts had never been dispatched to the combat units. In August 1918 only nine W.4s were used for the military service (four on the North Sea and five in Turkey), all others were either at training stations or under repair.

(ROD034)

SKU ROD034
Barcode # 4823017700123
Brand Roden

More From This Category


In Stock

Trumpeter 1/700 CH-46E Sea Knight (6 airplanes per box)

Trumpeter 1/700 CH-46E Sea Knight (6 airplanes per

RRP $16.99

Please login or register to view pricing.

In Stock

IBG 1/72 Combat Trainers 2in1 PZL P.11a-PZL.23A Plastic Model Kit [72529]

IBG 1/72 Combat Trainers 2in1 PZL P.11a-PZL.23A Pl

RRP $42.99

Please login or register to view pricing.

In Stock

IBG 1/72 Fw190D Painting Masks

IBG 1/72 Fw190D Painting Masks

RRP $7.99

Please login or register to view pricing.

In Stock

Trumpeter 1/48 J-7G Fighter

Trumpeter 1/48 J-7G Fighter

RRP $59.99

Please login or register to view pricing.

In Stock

IBG 1/72 Focke Wulf Fw 190D-15 Torpedo Bomber Plastic Model Kit [72540]

IBG 1/72 Focke Wulf Fw 190D-15 Torpedo Bomber Plas

RRP $42.99

Please login or register to view pricing.

In Stock

ModelSvit 1/72 Ye-152A Soviet twin-engined interceptor prototype Plastic Model Kit

ModelSvit 1/72 Ye-152A Soviet twin-engined interce

RRP $64.99

Please login or register to view pricing.

In Stock

Academy 1/72 Spitfire Mk.XIVc Plastic Model Kit [12484]

Academy 1/72 Spitfire Mk.XIVc Plastic Model Kit [1

RRP $19.99

Please login or register to view pricing.

In Stock

Arma Hobby 1/72 P-39N Airacobra Plastic Model Kit

Arma Hobby 1/72 P-39N Airacobra Plastic Model Kit

RRP $59.99

Please login or register to view pricing.